Radial Brick Smokestack

Radial Brick Smokestack (HM2A1H)

Location: Deadwood, SD 57732 Lawrence County
Buy South Dakota State flags at Flagstore.com!
Country: United States of America
Buy United States of America flags at Flagstore.com!

N 44° 22.284', W 103° 43.743'

  • 0 likes
  • 0 check ins
  • 0 favorites
  • 307 views
Inscription
This brick structure before you served as the foundation base and cleanout chamber that supported the 135-foot smokestack. Once part of the Burlington & Missouri Railroad Powerhouse complex, this brick feature was created in 1901 and helped supply electrical power to the interurban trolleys that traversed between the cities of Deadwood and Lead.
Based on historic photographs, the foundation for the smokestack was nearly as tall as the roof of the one story powerhouse. This feature was constructed of solid, high density, load-bearing brick. The entire brick structure became a solid mass with no voids upon its completion.
The circular space above the smokestack foundation was revealed during the cleanup and stabilization of the brick feature. This area was later identified as the cleanout chamber for the smokestack. Steel rungs were embedded into the masonry to provide workers access to clean and inspect the interior of the smokestack.
Brick used to construct the smokestack foundation were designed using the dry-press process. The brick clay was first mixed with a minimal amount of water and mechanically pressed under high pressure. Next, the mixed clay was mechanically extruded and cut with a wire to the correct length. Bricks of this type were most likely manufactured somewhere in the Midwest and brought



by train to Deadwood.
The manhole located next to this feature was unearthed during the construction of the park. Directly above the manhole, is a ductile iron pipe that once served as the sewage pipe for the homes above on McGovern Hill. This manhole and iron pipe was a later addition to this area and was installed sometime after the demolition of the Powerhouse and its smokestack.
DID YOU KNOW?
The height of the Burlington Powerhouse smokestack would have been determined by the draft required and to get smoke and gases above the stagnant valley air.
Smokestacks are a type of industrial chimneys that serve two purposes:
· Ventilation of smoke and gas
· Increase airflow into a furnace, thus improving fuel combustion.
Details
HM NumberHM2A1H
Tags
Placed ByThe Deadwood Historic Preservation Commission
Marker ConditionNo reports yet
Date Added Monday, August 6th, 2018 at 10:03am PDT -07:00
Pictures
Sorry, but we don't have a picture of this historical marker yet. If you have a picture, please share it with us. It's simple to do. 1) Become a member. 2) Adopt this historical marker listing. 3) Upload the picture.
Locationbig map
×
Radial Brick Smokestack
44.37140000, -103.72905000
UTM (WGS84 Datum)13T E 601259 N 4913910
Decimal Degrees44.37140000, -103.72905000
Degrees and Decimal MinutesN 44° 22.284', W 103° 43.743'
Degrees, Minutes and Seconds44° 22' 17.04" N, 103° 43' 44.58" W
Driving DirectionsGoogle Maps
Area Code(s)605
Which side of the road?Marker is on the right when traveling South
Closest Postal AddressAt or near 112 McGovern Hill Rd, Deadwood SD 57732, US
Alternative Maps Google Maps, MapQuest, Bing Maps, Yahoo Maps, MSR Maps, OpenCycleMap, MyTopo Maps, OpenStreetMap

Is this marker missing? Are the coordinates wrong? Do you have additional information that you would like to share with us? If so, check in.

Check Ins  check in   |    all

Have you seen this marker? If so, check in and tell us about it.

Comments 0 comments

Maintenance Issues
  1. Is this marker part of a series?
  2. What historical period does the marker represent?
  3. What historical place does the marker represent?
  4. What type of marker is it?
  5. What class is the marker?
  6. What style is the marker?
  7. Does the marker have a number?
  8. What year was the marker erected?
  9. This marker needs at least one picture.
  10. Can this marker be seen from the road?
  11. Is the marker in the median?